Setup Videos

Rear Auxiliary Hydraulic Selector Valve for the Bobcat Toolcat 5600 In this video we are demonstrating our Rear Hydraulic Selector Valve for the Bobcat Toolcat 5600. This add-on is perfect for running hydraulic salt spreaders and our 3-point hitch – The Farmboy HD. It has approximately 7-9 gallons/minute flow and takes only a 1/2 hour to install. No drilling or welding is required at any point during this installation.

 

Farmboy HD on the Bobcat Toolcat 5600 In this video we are showing our Farmboy HD 3-point hitch for the Bobcat Toolcat 5600. This hitch significantly increase the versatility of the Toolcat, allowing it to use implements ranging from planters to aerators to disc harrows – even a round bale spear. With its 1200 lb lift limit, and as much available down pressure, the Farmboy HD is capable of doing anything you ask of it. Even better, the Farmboy HD takes only 5 minutes to completely install.

 

Farmboy Pro Demonstrating its Hydraulic Down Pressure Capability In this video we are showing the hydraulic down pressure capability of the Farmboy Pro. The Toro Workman weighs nearly 2000 lbs. and the Farmboy Pro provides enough down pressure to easily lift up the back end.

 

Farmboy 3-point hitch removal and installation for Kubota RTV 900s, 1100s and 1140s In this video we demonstrate how quick and easy the installation of the Farmboy 3-point hitch is on any Kubota RTV 900, 100 or 1140.

 

Kubota 1100 equipped with our Hydraulic Kit In this video we are demonstrating our Hydraulic Kit. This Kit gives the Kubota RTV a multi-port hydraulics front and rear selector switch.

 

Bobcat Toolcat 5600 equipped with our “Farmboy HD” We are making the Bobcat Toolcat 5600 even more versatile with THE FARMBOY 3-point hitch added to the rear. This has 1100 lbs lifting capability up and down. The Farmboy HD installs in seconds and allows the bed to remain operational.

 

Kubota RTV 1100 with Our Farmboy and Hydraulic Selector Valve In this video we have outfitted the Kubota RTV 1100 with both our Farmboy 3-point hitch and our Hydraulic Selector Valve. The Selector Valve provides 4 hydraulic ports to the vehicle instead of the 2 that come factory. This allows you to have both the Farmboy and the dump bed plugged in, as seen in the video, or, during the winter, allows for both hydraulic angling and vertical movement of our snowplow – the Plowboy. A flip of a switch determines which pair of hydraulic ports is being used, making this an extremely convenient addition in the cold winter months. Plow angling and vertical movement can be controlled without ever leaving the warmth of the cab.

 

Installation of the Farmboy HD on the Bobcat Toolcat 5600 In this video we are demonstrating how quick and easy the installation of the Farmboy HD is on the Bobcat Toolcat 5600. This 1200 lb. capacity hitch requires only a minute for a complete installation! Although most Toolcat 5600s do not have rear auxiliary hydraulics, we manufacture this option as well, and it only takes 1/2 an hour to install.